WIZnet is a provider of Internet Offload Platform which enables easy Internet for embedded devices based on its patented hardwired TCP/IP technology. WIZnet was founded in South Korea in 1998. In Hong Kong, the United States, Europe set up three branches, a total of more than 70 agents, aimed at building Internet of things access service platform.

WIZnet公司成立于1998年,是一家专注于全硬件TCP/IP协议栈核心技术的半导体公司,拥有全硬件TCP/IP协议栈核心专利技术。总部位于韩国。在香港、美国、欧洲分设3家分公司,共计70余家代理商,旨在打造物联网接入服务平台。

product : W5500

产品名 : W5500

introduce

  • The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller. Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE. W5500 uses a 32Kbytes internal buffer as its data communication memory. SPI (Serial Peripheral Interface) is provided for easy integration with the external MCU.

简单介绍

  • W5500 是一款全硬件 TCP/IP 嵌入式以太网控制器,全硬件 TCP/IP 协议栈支持 TCP,UDP,IPv4,ICMP,ARP,IGMP 以及 PPPoE 协议。W5500 内嵌 32K 字节片上缓存以供以太网包处理。提供了SPI(外设串行接口)从而能够更加容易与外设 MCU 整合。

Key Features

  • - Supports 8 independent sockets simultaneously
  • - Supports Power down mode
  • - Supports Wake on LAN over UDP
  • - Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
  • - Internal 32Kbytes Memory for Tx/Rx Buffers
  • - 10BaseT/100BaseTX Ethernet PHY embedded
  • - Support Auto Negotiation (Full and half duplex, 10 and 100-based)
  • - Not support IP Fragmentation
  • - 3.3V operation with 5V I/O signal tolerance

特点

  • - 同时支持8个独立的插槽
  • - 支持掉电模式
  • - 支持网络唤醒
  • - 支持高速串行外围设备接口 (SPI模式0、3)
  • - 内部32KB收发缓存
  • - 内嵌 10BaseT/100BaseTX 以太网物理层 ( PHY )
  • - 支持自动协商 (10/100-Based全双工/半双工)
  • - 不支持IP分片
  • - 3.3V工作电压,I/O信号口5V耐压

Target Applications : The Ethernet interface chip is widely used in industrial automation, financial machines, intelligent home, security and other fields.

适用处 : 该以太网接口芯片广泛应用于工业自动化、金融机器、智能家居、安防等诸多领域。

product : W5500S2E-S1

产品名 : W5500S2E-S1

introduce

  • W5500S2E is a series of industrial grade serial to Ethernet module.W5500S2E integrated with the hardwired TCP/IP protocol MCU W5500.It supports TCP server, TCP client, and UDP modes. The maximum baud rate of the serial port is 1.152Mbps. W5500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring.

简单介绍

  • W5500S2E是一款工业级串口转以太网模块,集成了硬件TCP/IP 协议以太网芯片W5500。支持TCP服务器,TCP客户端,和UDP模式。串行端口的最大波特率是1.152Mbps。W5500S2支持WIZS2E ConfigTool(Windows®配置工具),网页和用于配置的AT命令。

Key Features

  • - Baud Rate can be configured to any standard value from 2Kbps to 1.152Mbps
  • - 10/100 Mbps Ethernet interface
  • - Flexible data packaging condition in serial interface
  • - Smart Ethernet cable detection and keep alive features
  • - Support DHCP, DNS, NetBIOS functions
  • - Support user password authorization for security
  • - Support serial AT command configuration method
  • - Built-in web server for browser and remote configuring
  • - Provide user-friendly configuration tool program (WIZS2E ConfigTool)
  • - Support local and remote firmware upgrad

特点

  • - 波特率可以配置为2Kbps至1.152Mbps的任何标准值
  • - 10/100 Mbps自适应以太网接口
  • - 灵活的串口数据分包设置
  • - 智能网线侦测及Keep Alive功能,保证网络链路实时畅通
  • - 支持DHCP、DNS、NetBIOS功能
  • - 支持连接密码校验功能,提高通信安全性
  • - 支持串口AT命令配置方法
  • - 内置Web服务器,方便客户进行远程设备管理
  • - 支持上位机配置工具配置方式(WIZS2E ConfigTool)
  • - 支持本地和远程固件升级

Target Applications : This module is widely used in industrial automation, financial machines, intelligent home, security and other fields.

适用处 : 该模块广泛应用于工业自动化、金融机器、智能家居。

product : W7500S2E-R1

产品名 : W7500S2E-R1

introduce

  • W7500S2E is a series of industrial grade serial to Ethernet module. W7500S2E integrated with the hardwired TCP/IP protocol MCU W7500/W7500P. It supports TCP server, TCP client and UDP modes. The maximum baud rate of the serial port is 460,800bps. W7500S2E supports WIZS2E ConfigTool (Configuration Tool for Windows®), web page and AT command for configuring.

简单介绍

  • W7500S2E是一款工业级串口转以太网模块, 集成了硬件TCP/IP 协议以太网芯片W7500/W7500P。支持TCP服务器,TCP客户端和UDP模式。串行端口的最大波特率为460,800bps。W7500S2E支持WIZS2E ConfigTool(Windows®配置工具),网页和用于配置的AT命令。

Key Features

  • - Baud Rate can be configured to any standard value from 300 bps to 460,800 bps
  • - 10/100 Mbps Auto-Negotiation Ethernet interface
  • - Flexible serial interface data packaging condition settings
  • - Smart Ethernet cable detection and keep alive features
  • - Support DHCP, DNS, NetBIOS functions
  • - Support user password authorization for security
  • - Support serial AT command configuration method
  • - Built-in web server for browser and remote configuring
  • - Provide user-friendly configuration tool program (WIZS2E ConfigTool)
  • - Support local and remote firmware upgrad

特点

  • - 波特率可以配置为300 bps~460,800 bps之间的任何标准值
  • - 10/100 Mbps自适应以太网接口
  • - 灵活的串行接口数据打包条件设置
  • - 智能网线侦测及Keep Alive功能,保证网络链路实时畅通
  • - 支持DHCP、DNS、NetBIOS功能
  • - 支持连接密码校验功能,提高通信安全性
  • - 支持串口AT命令配置方法
  • - 内置Web服务器,方便客户进行远程设备管理
  • - 支持上位机配置工具配置方式(WIZS2E ConfigTool)
  • - 支持本地和远程固件升级

Target Applications : This module is widely used in industrial automation, financial machines, intelligent home, security and other fields.

适用处 : 该模块广泛应用于工业自动化、金融机器、智能家居、安防等诸多领域。